Brown & Green Apron Tutorial

Another apron tutorial!

 This is the last of the three aprons I made to wear to Terri Brush's Art Camp. You can find a tutorial for my Denim Prairie apron here and one for my Black & White Apron here.

Life before apron

A thrifted blouse with interesting bodice detail

 and a lined skirt with pockets.

Each $2.50

Step 1 - Cut the sleeves away from the blouse. Cut the back away making sure to leave some fabric around the back of the neck. Cut off the lower portion of the blouse front.

Finish the lower edge with a rolled hem.

Confession time... I had not planned on this next step. My plan was to keep the front of the skirt in tact but I accidentally started cutting in the wrong place. Oops! So I just came up with a new (secret) idea...more on that in step 5!

Step 2 - Make two cuts in the front of the skirt.

  

Finish the edges with a top-stitched rolled hem.

  

Fold the waist band over so that the edges of the middle panel line up with the edges of the side panels and stitch to secure.

 

Inside view

Outside view

Step 3 - Cut the back of the skirt away at the side seam and along the waistband. Finish the side edge with a rolled hem.

 

Step 4 - Cut the sleeves to use to accent the pockets. (like the one on the left of the photo)

 Pin the sleeve in place inside the pocket.

 

Turn the pocket inside out and stitch the sleeve into place.

 

Trim the excess fabric and zigzag the edges.

 

Finished pocket close-up

Step 5 - Pin the upper third and the lower third portions of the top-stitched edges to overlap.

Pin the lining fabric to keep it from shifting.

 Stitch through both fabric layers along the seams in the pinned areas and along the bottom edge of the lining between the seams. (It's difficult to see the stitching in the photo)

 This creates a secret pocket!
If I make a quick trip to the craft store,
I'll have a place to stash money!

Step 6 - Pin the bodice in place on the skirt and pin the sides and neck of the bodice under to form the bib. 

 

Unpin the bib from the skirt and trim the edges.

 Finish the edges with a rolled hem.

Pin the bib to the skirt.

Stitch the bib in place.

 

Step 7 - Cut a rectangle from the front button section of the unused bodice (the portion that was cut away in step 1). Fold all the edges under and stitch.

 Stitch it to the end of a waistband section.

 Sew velcro to the end of each waistband section for a closure.

Step 8 - Gather the bib straps and hand sew a strip of the skirt fabric over the gathers. Replace the brown buttons with green ones.

 

 I'm not sure which of my three art camp aprons I like best.

This one...

Or maybe this one...

 And then again, this one is pretty cute too!

Which one is your favorite?

Sharing at: Funky Junk Interiors: Party Junk , Craft-O-Maniac: Craft-O-Maniac Monday , Not Just a Housewife: Show Me What Ya Got, Ginger Snap Crafts: Wow Me Wednesday, I Gotta Create!: Wildly Original Link Party, Fireflies and Jellybeans: Show Off Your Stuff

POTION No. 9 - A Charmed Halloween Tutorial

Time for another tutorial in my "Charmed Halloween" series.

POTION No. 9

Supplies and Tools Needed:

Small plastic vial with lid

Apothecary images (I found mine at The Graphics Fairy)

Resin (I used ICE Resin)

24 gauge dark annealed steel wire 

5-6 tiny clear beads 

Brown ink pad (I used Staz-On)

Green glitter

Green food coloring

Round-nose pliers

Flat-nose pliers

Wire cutters

Modge Podge

Paint brush

Scissors

Needle tool

1. Size the graphic to fit the vial and print. I added the words "Potion No. 9" and "drink if you dare".

 2. Cut the label and words out. Use the Modge Podge to glue the words onto the label so that the skull still shows. Let dry. Rub the label with the brown ink to age it. Wrap the label around the vial and glue into place.

3. Use the round-nose pliers to make a tiny loop at one end of a piece of wire. Add a bead and then use the pliers to make a curvy bend into the wire above the bead. Repeat with 4-5 more beads. Use the needle tool to poke a hole in the lid.

 4. Insert the beaded end of the wire into the vial. Place the cap back on with the wire end extending up through the hole in the lid. Make a wrapped loop at the top. (Find out how to make a wrapped loop here)

 

5. Remove the lid from the vial.

 

6. Mix the resin according to the manufacturer's instructions. Add a drop of food coloring and some glitter and stir.

7. Pour the resin into the vial to fill (make sure to leave a little space at the top so it doesn't overflow once the lid is replaced). Replace the lid. Let cure.

 For the Tag:

Remove the string from a small mailing tag. Use Modge Podge to glue an image collage to one side of it. Let dry. Repeat for the other side. Once dried, rub with brown ink to age the images. Use the string to tie the charm onto the tag.

 Front of Tag

Back of Tag

I hope you enjoyed this tutorial.

Be sure to return in a couple of days for the next tutorial

in my "Charmed Halloween" series!

More tutorials from the Charmed Halloween series:

"Watching Eye"

"Mummy"

"Spider 

"Caged Skull"

Sharing With: I Gotta Create!: Wildly Original Party , Funky Junk Interiors: SNS 155 & 159

Thanks for stopping by!

 

Step 3 - March - Good Luck Wishes

I've completed step 3 - March's project - of my JA (Jewel-aholics Anonymous) 12-step program from my earlier post "My Addiction" just in time for St. Patty's Day.

Since St. Patrick's Day is in March it was inevitable that this month's project would celebrate the lucky holiday. Besides, who couldn't use some of St. Patty's Irish Green Luck?!

I gathered together several green and gold items.

I even found two 4-leaf clovers amongst my jeweled treasures.

I settled on a brooch for my focal piece. It was missing three of the original stones so I took the opportunity to add the words, "Good Luck Wishes" which I printed onto some green colored decorative paper and covered with ICE Resin®.

I also encased the gold 4-leaf clover (which I grunged-up a bit to age it) in the resin to appear as if it were magically floating.

For the dangle, I chose to use a jeweled link

and attached an earring to it.

Visually, it's a fairly weighty piece so I added a heavy vintage chain which I embellished with a few links from a different chain along with a wire wrapped green stick pearl.

 

 Good Luck Wishes to all of you on St. Patrick's day and everyday after!

Below is where you can check out my previous

JA (Jewel-aholics Anonymous) projects.

January - "Snowflake"

February - "Tin Heart"

June - "It's Heating Up!"

July - "Golden Dreams"

Bonus Project - "Masquerade Mask"

Sharing with:

French Country Cottage: Feathered Nest Friday, I Gotta Create: Spring Fling, Knick Of Time: That's the Ticket, Funky Junk Interiors: SNS, Ginger Snap Crafts: Wow Me Wednesday