WATCHING EYE - A Charmed Halloween Tutorial

Just as I promised, I'm sharing the first tutorial in my

"Charmed Halloween" series.

THE WATCHING EYE!

Supplies and Tools Needed:

Mike's Hard Lemonade bottle cap

Eyeball and skull images (I found mine at The Graphics Fairy)

Resin (I used ICE Resin)

24 gauge dark annealed steel wire

Round-nose pliers

Flat-nose pliers

Wire cutters

Modge Podge

Paint brush

Jeweler's saw

Drill

Small file

Scissors

Hammer

1. Size the graphics to fit the bottle cap and print. I added a tiny eye and the words "Watching You" to the skull graphic.

2. Drill a hole in the middle of the cap and use the jeweler's saw to cut out the lemon shape. File to smooth the edges.

3. Drill a tiny hole in the rim of the bottle cap at the center top. Make a swirl at one end of a wire. Insert the straight end of the wire through the hole and make a wrapped loop. (Find out how to make a wrapped loop here)

4. Cut the images to fit inside the cap. (Only one is shown in the photo below) Brush Modge Podge onto both of the images and let dry.  It's important to completely cover the front, back and even the sides of the paper so that the resin will not seep into the paper causing it to become transparent.

5. Use the Modge Podge to glue the images back to back into place with the eye at the front of the cap and the skull at the back. Use pliers to start bending the rim down at the back of the cap and then hammer it flat and file to smooth the edges.

6. Mix the resin according to manufacturer's instructions and carefully pour over the image at the back. Let cure.

 

7. Repeat with a layer of resin to cover the eye opening on the front.

For the Tag:

Remove the string from a small mailing tag. Use Modge Podge to glue an image collage to one side of it. Let dry. Repeat for the other side. Once dried, rub with brown Staz-On ink to age the images. Use the string to tie the charm onto the tag.

Front of Tag

 

Back of Tag

 

I hope you enjoyed this tutorial.

Be sure to return in a couple of days for the next tutorial

in my "Charmed Halloween" series!

More tutorials from the Charmed Halloween series:

"Potion No. 9"

"Mummy"

"Caged Skull"

"Spider"

This project was featured on the Graphics Fairy Brag Monday.

Sharing With: Craft-O-Maniac: Craft-O-Maniac Monday, Funky Junk Interiors: SNS Party & 159, Polish The Stars: Halloween Link Party, Momnivore's Dilemma: Halloween Link Party, The Graphics Fairy: Brag Monday Party, Not Just A Housewife: Show Me What You Got, Southern Lovely: Show & Share, I Gotta Create!: Wildly Original

Thanks for stopping by!

 

A Charmed Halloween!

I'm taking part in a fun Halloween Charm exchange hosted by Thespa at Vintiquities Workshop. This is my first time ever to participate in any swap so I'm super excited to see how it goes!

I've been busy creating these spooky little guys!

 There are five different styles.

A magic potion, spider, mummy, caged skeleton and a watching eye!

If you like them, please check back as I will be sharing tutorials on how to make each one over the next several days.

And best of all, I'll be sharing the charms I get in return as soon as I get my anxious little fingers on them! How fun it's going to be to receive a box of scary creations in the mail!

There's still plenty of time to enter my

***Mixed Media Jewelry E-Book GIVEAWAY!***

Enter here.

Update: The following tutorials are now posted.

"Watching Eye"

"Potion No. 9"

"Mummy"

"Spider"

"Caged Skull"

Thanks for stopping by!

 
Sharing with: Funky Junk Interiors: SNS, It's Overflowing: Overflowing With Creativity Link Party